130 3A. Sprint Service: The Basics
● Stop: stops the recording. Once stopped, tap
either Use this recording (attach it to your
message), or Discard (delete the current
recording and re-record).
䡲 Slide: Opens the Edit slideshow menu. From here
you can add a slideshow to your message:
● Touch and hold the empty gray created slide
(for example, Slide 1), tap
Add multimedia, and
then select the picture you want to add to the
slide.
● Continue this process to add additional
pictures to your slideshow, and when you are
finished.
6. When you have finished creating your new MMS
message, tap
Send.
To view and play a multimedia message:
1. Press and tap > (Messaging).
2. From the message list, tap a multimedia message
to open it.
3. While the message is open, tap the play icon (on a
video or audio file) to play back the file, or tap an
image to view a picture.
To reply to a multimedia message:
1. Press and tap > .
2. From the message list, tap a multimedia message
to open it.
3. With the message open, tap the Enter message
here field and then type your reply message.
4. When you are satisfied with your reply, tap Send.
Note: To remove or replace a picture or an audio attachment,
on the Compose screen, tap (
Remove) next to the
attachment.
To change the file, touch and hold the slide and select
Replace XXX.
Tip: The file attachment on the MMS message can be saved
to the microSD card. To save the attachment, touch and
hold the file and tap
Save attachment from the Message
options context menu.
If the image or video is open, press and tap
Save
attachment
.
SPH-P100.book Page 130 Thursday, October 14, 2010 2:31 PM
To Next Page
Loading...
