2B. Settings 53
Settings
1. Press > and tap > Sound
settings > Notification ringtone.
2. Tap a notification ringtone from the available list.
The ringtone briefly plays when selected.
3. Tap OK to assign a ringtone.
Activating Feature Sounds
You can select whether your device plays a sound
when using the keyboard, when making an onscreen
selection, and when an SD card notification occurs.
1. Press > and tap > Sound
settings.
2. Tap a feature to enable it. (If a green check mark
appears to the right of the feature, it is already
enabled.)
䡲 Audible touch tones plays a sound when using the
keyboard.
䡲 Audible selection plays a sound when making any
onscreen selection.
䡲 Screen lock sounds plays a sound when locking
and unlocking the screen.
䡲 Haptic feedback causes the device to vibrate
when pressing onscreen keys or with certain UI
interactions.
Vibrate
To set your device to always vibrate:
1. Press > and tap > Sound
settings > Device vibrate.
2. Tap Always. (Other options are also available.)
To set your device to vibrate while using the keyboard and
when making onscreen selections:
1. Press > and tap > Sound
settings.
2. Tap Haptic feedback. (If you have already checked
the option, tapping it again deselects the option.)
䡲 This provides physical feedback when making
onscreen selections.
To set the vibration intensity on your device:
1. Press > and tap > Sound
settings.
2. Tap Vibration intensity.
SPH-P100.book Page 53 Thursday, October 14, 2010 2:31 PM
To Next Page
Loading...
