Make Your Device Visible
Pairing Bluetooth Devices
To make your device visible:
Use the Bluetooth pairing process to establish a trusted
connection between your device and another Bluetooth
device. When you pair devices, they share a passkey,
allowing for fast, secure connections while bypassing the
discovery and authentication process.
1. From the Bluetooth settings screen, touch
Menu
Visibility timeout
.
Making your device visible allows it to be detected by
other devices for pairing and communication.
To pair your device with another Bluetooth device:
2. Select a time that you would like your device visibility
to time-out.
1. Verify your Bluetooth is active.
2. Touch
Scan
. Your device will display a list of discovered
Show Received Files
in-range Bluetooth devices.
To show received files:
3. Touch a device from the list to initiate pairing.
From the Bluetooth settings screen, touch
Menu
Received files
.
A list of all files received from Bluetooth displays.
4. Enter the passkey or PIN code, if needed, and
touch
OK
.
5. The external device will then have to also accept the
Scan for Bluetooth Devices
connection and enter your device’s PIN code.
To scan for Bluetooth devices:
ONON
Note:
Due to different specifications and features of other
Bluetooth-compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible with all Bluetooth
compatible devices.
1. Verify that Bluetooth is ON .
2. From the Bluetooth settings screen, touch
Scan
to
search for visible external Bluetooth-compatible
devices such as headsets, devices, printers, and
computers.
Connections 88
To Next Page
Loading...
