Note:
Pairing between two Bluetooth devices is a one-time
process. Once a pairing has been created, the devices
will continue to recognize their partnership and
exchange information without having to re-enter a
passcode again.
Rename or Unpair a Paired Device
Unpair a paired device to break the connection between the
device and your tablet, but retain the knowledge of the
pairing. At a later point when you want to reconnect the
device, there is no need to setup the connection
information again.
Note:
Disconnections often occur automatically if the
paired device goes out of range of your tablet or it
is powered off. Upon reconnection, you may be required
to re-enter all the previous pairing information.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings screen, touch next to
the previously paired device. This opens the connected
device’s menu options.
3. Touch
Rename
to change the name of the paired
device.
4. Touch
Unpair
to unpair from the paired device.
Sending Contacts with Bluetooth
Depending on your paired devices’ settings and capabilities,
you may be able to send photos, Contact information, or
other items using a Bluetooth connection.
Note:
Prior to using this feature, Bluetooth must first be
enabled, and the recipient’s device must be visible.
1. Verify your Bluetooth is active.
2. From the Home screen, touch
Contacts
.
3. Touch
Menu
Share namecard via
.
4. Touch each contact th
at you would like to send via
Bluetooth. A green check mark will appear next to each
entry you select.
89
To Next Page
Loading...
