›
Connect to a WLAN using a Wi-Fi Protected
Set-up (WPS)
Using WPS, you can connect to a secured network.
To connect to a WLAN with a WPS button,
In Idle mode, open the application list and select
1
Settings
→
Wireless and network
→
Wi-Fi settings.
Select
2
WPS button connection.
Press a WPS button on the access point within 2 minutes.
3
To connect to a WLAN with a WPS PIN,
In Idle mode, open the application list and select
1
Settings
→
Wireless and network
→
Wi-Fi settings.
Select a network indicated by the WPS icon and select
2
WPS PIN.
On the access point, enter the PIN and press the start
3
button.
AllShare
Learn to use the Digital Living Network Alliance (DLNA)
service that enables you to share media files between DLNA-
enabled devices in your home over a WLAN.
You must first activate the WLAN feature and add a WLAN
profile.
► p. 104
The supported file formats may vary depending on
●
the software of the device.
Some files may not play on the DLNA-enabled devices
●
depending on the devices.
To Next Page
Loading...
