Call Functions and Contacts List 49
3.
Press and then tap
Add to black list
. All phone
numbers associated with this entry are then added to the
reject list.
To assign single numbers as rejected via Auto reject list:
1. From the Home screen, press and then tap
(
Settings
) ➔
Call
➔
Call rejection
➔
Black list
.
2. Tap (
Add
) and either enter the phone number or
select a Contact from your Logs or Contacts list.
3. Tap
Save
to complete the assignment.
International Calls
1. From the Home screen, tap , then touch and hold
. The + symbol displays.
2. Use the on-screen keypad to enter the country code, area
code, and phone number.
•
If you make a mistake, tap
once to delete a single digit.
•
Touch and hold to delete all digits.
3. Tap .
Pause Dialing
You can dial or save phone numbers with pauses for use with
automated systems, such as voicemail or financial phone
numbers.
•
2-Second Pause -
Automatically sends the next set of numbers after
a two-second pause. This is indicated in the number string as a
comma (
,
).
•
Wait -
Sends the next set of numbers only after tapping . This is
indicated in the number string as a semicolon (
;
).
1. From the Home screen, tap and use the on-screen
keypad to enter the phone number.
2. Press and then tap
Add 2 sec pause
. This feature adds
an automatic two-second pause.
3. Use the keypad to enter the additional numbers that will be
dialed automatically after the second pause.
Tip:
You can create pauses longer than three seconds by entering multiple
3-sec pauses.
4. Tap .
Send
To Next Page
Loading...
