Samsung GT-C5510 - Page 53

SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
11-2
This Document can not be used without Samsung's authorization
56
1)
Detach the slide FPCB connector from board
using the tweezers.
※
Caution
1)
Not to scratch or damage the Slide FPCB.
1)
Unscrew
6
points of the Rear.
※
Caution
1)
Do not force much power on the screws.
78
1)
Unscrew
6
points of the Lower.
※
Caution
1)
Be care of scratch and molding damage.
1)
Open the LCD connector and slide FPCB
connector and CIF, Receiver, Motor Ass'y
FPCB Connecotr and detach them from the
LCD PBA.