Samsung GT-P5200 Service Manual

1.
Safety Precautions
1-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung
’s
written authorization is strictly prohibited.
1-1.
Repair Precaution
Before attempting any repair or detailed tuning, shield the device from RF noise or static
electricity discharges.
Use only demagnetized tools that are specifically designed for small electronic repairs,
as most electronic parts are sensitive to electromagnetic forces.
Use only high quality screwdrivers when servicing products. Low quality screwdrivers can
easily damage the heads of screws.
Use only conductor wire of the properly gauge and insulation for low resistance, because of
the low margin of error of most testing equipment.
We recommend
22-
gauge twisted copper wire.
Hand-soldering is not recommended, because printed circuit boards
(
PCBs) can be easily
damaged, even with relatively low heat. Never use
a
soldering iron with
a
power rating of
more than 100 watts and use only lead-free solder with a melting point below 250°C (482°F).
Prior to disassembling the battery charger for repair, ensure that the AC power is disconnected.
Always use the replacement parts that are registered in the SEC system. Third-party replac
ement parts may not function properly.

Samsung GT-P5200 Specifications

General

Model	GT-P5200
Category	Tablet
RAM	1GB
Internal Storage	16 GB
Expandable Storage	microSD, up to 64GB
Rear Camera	3.15 MP
Front Camera	1.3 MP
Operating System	Android 4.2.2 (Jelly Bean), upgradable to 4.4.2 (KitKat)
SIM	Micro-SIM
Video	720p@30fps
Loudspeaker	Yes, with stereo speakers
3.5mm jack	Yes
WLAN	Wi-Fi 802.11 a/b/g/n, dual-band, Wi-Fi Direct, hotspot
Bluetooth	4.0, A2DP
GPS	Yes, with A-GPS, GLONASS
USB	microUSB 2.0
Sensors	Accelerometer, compass
Display	10.1 inches
Battery	6800 mAh
Dimensions	243.1 x 171.4 x 7.9 mm
Chipset	Qualcomm MSM8228 Snapdragon 400
CPU	Dual-core 1.6 GHz