Connectivity
90
›
Connect to a WLAN using a Wi-Fi
Protected Setup (WPS)
In Menu mode, select
1
Settings
→
Connectivity
→
Wi-Fi.
Select
2
WPS PBC or WPS PIN depending on the AP
device type.
Press a WPS button on the AP device within 2 minutes.
3
Or, enter a PIN on the AP device and select Start within
2 minutes.
Option Function
IP address type Customise IP and DNS addresses.
Proxy address
and port
Enter the address and port
number of the proxy server.
AP MAC
View the Mac address of the
WLAN AP.
When you are nished, select
4
Back.
To delete all details of the connection prole, select
Forget.
To Next Page
Loading...
