Samsung GT-S5300 - User Manual

Other manuals for Samsung GT-S5300

Quick Start Guide28 pages

Questions and Answers

B
Barbara JohnsonJul 26, 2025
What to do if my Samsung GT-S5300 freezes or has fatal errors?
- A
  Amanda SchultzJul 26, 2025
  If your Samsung Cell Phone freezes, you may need to close applications or reset the device. If an application is frozen but your device is still responsive, close the application using the task manager. If the device is unresponsive, press and hold the Power key for 8-10 seconds. If the problem continues, perform a factory data reset by going to Settings, then Privacy, then Factory data reset, then Reset phone, and finally Erase everything.
L
lisa97Jul 31, 2025
Why does my Samsung GT-S5300 Cell Phone prompt for password?
- F
  fernandezjamesJul 31, 2025
  If the device lock feature is enabled on your Samsung Cell Phone, you must enter the password you set for the device.
B
Brooke OsborneAug 5, 2025
Why does my Samsung Cell Phone touch screen responds slowly or improperly?
- C
  Chelsea KruegerAug 5, 2025
  The touch screen on your Samsung Cell Phone may respond slowly or improperly for several reasons. Protective covers may prevent the device from recognizing your inputs, so remove any protective covers. Ensure your hands are clean and dry when tapping the screen. Restart your device to clear any temporary software bugs. Make sure your device’s software is up to date. If the touch screen is scratched or damaged, take your device to a Samsung Service Centre.
C
Christine DanielsAug 10, 2025
Why does my Samsung GT-S5300 Cell Phone prompts for PUK?
- T
  tgreenAug 10, 2025
  Your Samsung Cell Phone prompts for PUK because your SIM or USIM card is blocked, usually because you entered your PIN incorrectly several times. You must enter the PUK supplied by your service provider.
A
Andrew HansenAug 15, 2025
Why does my Samsung GT-S5300 prompt for PIN?
- J
  Jennifer MasonAug 15, 2025
  Your Samsung Cell Phone prompts for a PIN when you use the device for the first time or when the PIN requirement is enabled. You must enter the PIN supplied with the SIM or USIM card. You can disable this feature by using Lock SIM card.
A
Amanda BrownAug 20, 2025
Why does my Samsung GT-S5300 Cell Phone prompt for PIN2?
- D
  Dylan ShawAug 20, 2025
  When you access a menu requiring the PIN2 on your Samsung Cell Phone, you must enter the PIN2 supplied with the SIM or USIM card. For details, contact your service provider.

Summary

Assembling

Unpack

Insert the SIM or USIM card and the battery

Guide to inserting SIM/USIM card and battery into the device.

Charge the battery

Instructions for charging the device battery, including initial charge.

Getting started

Turn on or off your device

Procedure for powering the device on and off, including PIN entry.

Use the touch screen

Basic touch screen gestures, usage tips, and precautions for optimal performance.

Lock or unlock the touch screen and the keys

Communication

Calling

Making, receiving, and managing phone calls on the device.

Messages

Creating, sending, and managing SMS and MMS messages.

Connectivity

Wi-Fi

Bluetooth

Settings

Wireless and networks

Location and security

Troubleshooting

Touch screen issues

Device freezes or fatal errors

Safety information

Prevent electric shock, fire, and explosion

Essential warnings to prevent electric shock, fire, and explosion risks.

Handle and dispose of batteries and chargers with care

Precautions for safe handling, charging, and disposal of batteries and chargers.

Samsung GT-S5300 Specifications

General

Model	GT-S5300
Processor	832 MHz
RAM	384 MB
Main Camera	2 MP
Dimensions	104 x 58 x 11.5 mm (4.09 x 2.28 x 0.45 in)
Status	Discontinued
Network	GSM / HSPA
2G bands	GSM 850 / 900 / 1800 / 1900
3G bands	HSDPA 900 / 2100
Speed	HSPA 7.2/0.384 Mbps
GPRS	Yes
EDGE	Yes
SIM	Mini-SIM
GPU	No
Card slot	microSD, up to 32 GB
Alert types	Vibration, MP3, WAV ringtones
Loudspeaker	Yes
3.5mm jack	Yes
Bluetooth	v3.0, A2DP
GPS	Yes, with A-GPS
Radio	Stereo FM radio, RDS
USB	microUSB 2.0
Browser	HTML
Java	Yes, via Java MIDP emulator
Display	TFT, 256K colors
Resolution	240 x 320 pixels
Operating System	Android 2.3 (Gingerbread)
Battery	Li-Ion 1200 mAh battery
WLAN	Wi-Fi 802.11 b/g/n, hotspot
Sensors	Accelerometer
Colors	Black, White, Pink