Samsung GT-S5300 - Charge with USB Cable

Assembling
16
Plug the large end of the travel adapter into an electrical
3
socket.
If the device receives an unstable power supply while
●
charging, the touch screen may not function. If this
happens, unplug the travel adapter from the device.
The device may heat up while charging. This is
●
normal and should not affect your device’s lifespan or
performance.
If your device is not charging properly, take your
●
device and the charger to a Samsung Service Centre.
When the battery is fully charged, first unplug the travel
4
adapter from the device, and then from the electrical
socket.
Do not remove the battery while the device is
connected to the travel adapter. Doing so may damage
the device.
To save energy, unplug the travel adapter when not in
use. The travel adapter does not have a power switch, so
you must unplug the travel adapter from the electrical
socket when not in use to avoid wasting power. The
travel adapter should remain close to the electrical
socket when in use.
Charge with a USB cable
›
Before charging, ensure that your computer is turned on.
Open the cover of the multifunction jack.
1
Plug the small end (micro-USB) of the USB cable into the
2
multifunction jack.