Samsung GT-S5300 - Connect to a Wi-Fi Ap with a Protected Setup

Connectivity
89
Add a Wi-Fi AP manually
›
In the application list, select
1
Settings
→
Wireless and
networks
→
Wi-Fi settings
→
Add Wi-Fi network.
Enter an SSID for the AP and select a security type.
2
Set the security settings according to the security type
3
you selected, and then select Save.
Connect to a Wi-Fi AP with a protected setup
›
You can connect to a secured AP with a WPS button or WPS
PIN. To use this method, your wireless access point must have
a WPS button.
Connect with a WPS button
In the application list, select
1
Settings
→
Wireless and
networks
→
Wi-Fi settings.
Select
2
WPS button connection.
Press a WPS button on the AP within 2 minutes.
3
Connect with a WPS PIN
In the application list, select
1
Settings
→
Wireless and
networks
→
Wi-Fi settings.
Select an AP that has WPS available, and then select
2
WPS
PIN.
On the AP, enter the PIN, and then press the WPS button.
3