ENG - 24
Raising the Soundbar 0.6 inches
(15 mm)
1. Use the 2 supplied Screws to x the two
Holder-Feet to the wall mount assembly on
the bottom panel of the Soundbar.
Raising the Soundbar 0.8 inches
(20 mm)
1. Attach the two Holder-Feet to the two
Holder-Supports, as shown in the gure
below.
2. Use the 2 supplied Screws to x the two
Holder-Feet to the Wall Mount assembly on
the bottom panel of the Soundbar.
To Next Page
Loading...
