To Next PageTo Next PageWhat to do if the wire driving the pump in my Samsung Heba WF8802 Washer is loose?
If the wire driving the pump in your Samsung Washer has come loose, check the connection and take the necessary steps to secure it.
How to properly install the heater in a Samsung Heba WF8802 Washer?
When reassembling the heater in your Samsung Washer, insert it into the correct position of the bracket inside the tub. Ensure you push it inward until the packing part completely enters the tub, sticking firmly. Secure the holding nut with a force of 5Kgf/cm2 to prevent water leaks.
Essential safety guidelines for service personnel handling the equipment.
Describes common and optional features of the washing machine.
Provides detailed technical specifications for different models.
Compares specifications of current models with existing 5 kg washers.
Compares specifications of current models with existing 6 kg washers.
Lists and describes specifications for optional features available.
Lists the necessary tools for disassembling and reassembling the unit.
Provides visual guides for standard disassembly steps.
Details error codes, their modes, causes, and remarks.
Provides step-by-step corrective actions for common error codes.
Explains standards for material codes and assembly materials.
Visual breakdown of the main components of the washing machine.
Lists and illustrates parts related to the frame and covers.
Details the parts comprising the tub and drum assembly.
Lists components for the front frame assembly.
Exploded view and parts list for the control panel and drawer.
Illustrates and lists parts for the housing drawer assembly.
Lists miscellaneous parts not categorized elsewhere.
Comprehensive list of all screw types used in the assembly.
Diagram of the main PCB with component identification and functions.
Circuit diagrams illustrating connections for main components.
Diagram of the sub PCB with component identification.
Detailed descriptions of contact terminals on the sub PCB.
Illustrates the overall wiring connections within the appliance.
Detailed schematic of the main and sub control circuits.
Explains the naming convention used for the AEGIS project models.
General