Samsung HG28NC690 - Connecting the TV to an SBB or STB

16
English
Connecting the TV to an SBB or STB
1. Connect the DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable.
✎ The "ETH MODEM" jack name that you connect the Data Cable to may differ depending on the SBB or STB type.
ETH MODEM
TV Rear Panel
Data Cable
[HC690_ZA]Install_Guide_00ENG.indd 16 2014-03-21  1:25:48