19
English
Connecting the MediaHub HD
Output to any external source connected to MediaHub HD on the hotel desk.
1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD.
2. Connect the HDMI IN 1, 2(DVI) or 3 (ARC) port of the TV and the HDMI port of the MediaHub HD.
• MediaHub HD
– The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB)
and corresponding outputs. The corresponding output sources connect from MediaHub to the TV. MediaHub
communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an
external source to the MediaHub. MediaHub communicates with the TV by sending messages regarding Active/
Inactive sources. The TV switches to the Active external source.
– You have to connect the HDMI of the MediaHub to the HDMI IN 2(DVI) port of the TV.
– When the TV is on, connect the TV and the RJP within 10 seconds.
• Special features
– PIP
– Auto Detection
HDMI
USB RS/232
TV Rear Panel
MediaHub HD Rear
2
HDMI cable
1
RS-232 Data Cable
[HC690-EUROPE]Install Guide-X0ENG.indd 19 2014-04-08 11:20:40
To Next Page
Loading...
