1. Region Settings
Check the Region settings.
If you want to change a setting, select it and press ENTER.
If you don’t want to change any settings, go to the next step.
2. TV Installation Type
If you select “Cloning Mode”, “Select Solution” appears.
Select “TV Basic Setup” or “Commercial TV Mode” to go to the next step.
3. Menu Language
Select the OSD (On Screen Display) language.
4. Select the Country and Picture Mode
Select the appropriate country and picture mode.
Depending on the model and region, some countries may not be included.
5. Auto Tuning
Select the antenna source and channel type. Configure the settings and select Scan.
The Auto Tuning function starts searching for channels.
When Auto Tuning is completed, the channel information is displayed.
6. Clock
7. TV Setup Complete
To Next Page
Loading...
