Securing the TV to the Wall
[
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do
all safety precautions provided in the included Safety Flyer. For added stability, install the anti-fall device for safety
purposes, as follows.
To avoid the TV falling
1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly
installed in the wall.
✎ Depending on the type of wall, you may require additional hardware, such as an anchor.
✎
2. Remove the screws from the center of the back of the TV, put the screws into the clamps, and then fasten the screws
onto the TV again.
✎ Screws may not be supplied with the product. In this case, please purchase screws with the following
specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string
tightly.
✎ NOTE
y Install the TV close to the wall so that it does not fall backwards.
y
on the TV.
y Untie the string before moving the TV.
4. Verify that all connections are properly secured. Periodically check connections for any sign of fatigue to protect
against failure. If you have any doubt about the security of your connections, contact a professional installer.
Anti-theft Kensington Lock
physically fix the system when using it in a public place. The appearance
and locking method may differ from the illustration, depending on the
additional information on its proper use.
To lock the product, follow these steps:
Please find the “K
the “K” icon.
1.
as a desk or a chair.
1
<Optional>
2.
3.
1
).
4. Lock the lock.
✎ These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎ The locking device must be purchased separately.
✎
To Next Page
Loading...
