Mixed Channel Map
Use the Channel Editor to sort the channels after turning on the ‘Mixed Channel Map’ function in the Hotel Option
Menu.
Sound Bar
y Samsung Sound-Bar & Hospitality TV
Use Samsung Sound-Bar & hospitality TV’s support for HDMI 1.4 to listen to TV sound on the Sound-Bar using a
single HDMI cable.
Supported models:
y
y “Hotel mode” operation from the Sound Bar
The following TV hotel options should be set in advance.
y Hotel option → Power On → Power ON Volume = “Enable” / Power ON Vol / Max Vol
y Hotel option → External Device → Sound Bar Out = “On”
while it turns on, and is converted to “hotel mode” by itself.
The change of the power-on volume & max volume on the TV is applied to the connected sound-bar, as the TV
boots up twice.
y Features of “Hotel Mode” in Sound Bar
HDMI_CEC enabled.
volume/2)
Ex.) If the volume settings on the TV are “power-on volume=20 and max volume=90”, the Sound bar will work as
power-on volume=10, max volume=45.
*This function may differ depending on the model.
To Next Page
Loading...
