Hotel Option menu Item Description
Channel
Channel Setup
Gives you direct, immediate access to some of the channel menu functions on the
Broadcasting menu such as Auto Tuning, Programme Rating Lock, Audio Options,
etc.
Channel Editor
Change the channel numbers and names, manage genre and language groups
and delete channels.
Apply the Screen Off to channels you select. The Screen Off blanks out the video
from a channel and outputs only audio.
display each channel directly.
Mixed Channel Map
Enables showing/browsing all antenna type (Aerial/Cable) channels at the same
time.
ON: When set to on, guests can access the complete channel map irrespective of
the selected antenna type. The Channel List/Channel Editor will also populate
Aerial as well Cable type channels.
OFF: When set to off, guest can access the channel map corresponding to the
selected antenna type (Aerial/Cable) only. The Channel List/Channel Editor will
only show the selected antenna type channels.
Dynamic SI
ON:
OFF
Channel Rescan Message
When there is a mismatch between the data in the channel map and the transmitted
data, the TV autotunes the channels to restore the data/parameters in the channel
map.
ON: When Channel Rescan Message
channels are being rescanned will be displayed to the guest.
OFF: When Channel Rescan Message
should not to be displayed to the guests.
MyChannel
Enable or disable the MyChannel function.
This function is not available when set to Hospitality Mode: Standalone.
Subtitle Auto On
This function turns the function on or off that automatically turns on the subtitles in
a specific country.
heading to Europe.
This function is related to France’s subtitle specification. The rest of the subtitle
functions available according to the country specifications regardless of Subtitle Auto
On function.
ON: When Subtitle Auto On is set to on, it follows France’s subtitle specifications.
OFF: When Subtitle Auto On is set to off, it does not follow France’s subtitle
specifications.
TTX Widescreen Mode
ON: TTX should show in
OFF: TTX should show in
Broadcasting Sel
If you change the function value, data in such as the channel list and the channel map
may be reset. In this case, you must run Auto Tuning again.
To Next Page
Loading...
