11-6Samsung Electronics
11-3 Wired Remote Controller-Buttons and Display
Mode selection button
Communication error indicator
On Timer setting
Off Timer setting
Test indicator
Timer button
Timer Set/Cancel button
Test button
Filter Reset button
Temperature adjustment buttons
Removing frost indicator
Temperature setting
Fan speed
Air flow direction
Filter Sign indicator
On/Off button
Fan speed adjustment button
Swing button(Except Duct type)
On/Off indicator
Operating mode
Centralized controller indicator
(In case of installing the Centralized controller)
Note : • The button is for your installation specialist. You must not press it.
• After cleaning the air filter, press the button. Then the wired remote controller will display the
Filter Sign indicator when the time to clean the air filter.
• Duct type air conditioner does not have function of adjusting air flow direction.
Therefore, the function is not operated even if you press the button.
To Next Page
Loading...
