Samsung HL-P5063W - Viewing an External Signal Source

English - 41
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment, such as
VCR, DVD, Set-Top box and the TV source (broadcast or cable).
Setting the Signal Source
1
Press the MENU button.
Press the ENTER button to
select “Input”.
2
Press the ENTER button to
select “Source List”.
Press the … or † button to
select a signal source, then
press the ENTER button.
Press the EXIT button to exit.
Alternate method
Press the SOURCE button on the
remote control repeatedly to
select an external signal source.
NOTE
• When you connect equipment to the TV, you can choose
between the following sets of jacks: “AV1”, “AV2”, “S-Video1”,
“S-Video2”, “Component1”, “Component2”, “PC”, “DVI” or
“HDMI” on the TV’s rear panel, and “AV3” or “S-Video3” on
the TV’s side panel.
Input
Source List : TV √
Edit Name √
Move Enter Return
Input
Picture
Sound
Channel
Setup
Source List
TV
AV1 : - - - -
AV2 : - - - -
AV3 : - - - -
S-Video1 : - - - -
S-Video2 : - - - -
S-Video3 : - - - -
▼ More
Move Enter Return
Input
Picture
Sound
Channel
Setup
AV1