Your New Wide TV
English - 10
Front Panel LED Indicators
The three lights on the front panel indicate the status of your TV.
The product color and shape may vary depending on the model.
Indicator Light Key
: Light is On
: Light is Blinking
: Light is Off
Remote Control Sensor
Aim the remote control towards this spot on the TV.
POWER
Press to turn the TV on and off.
Indicator Lights
• It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.
• The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working.
TIMER
Standby state.
The picture will automatically appear in about 15 seconds.
Auto Timer ON/OFF has been set and the set will automatically be
turned on in about 15 seconds.
A cooling fan inside the set is not operating normally.
Lamp cover on the rear of the set is not properly shut.
Check if the ventilation hole on the rear of the set is blocked, because
if the inner temperature is too high, the power will shut off.
Lamp may be defective. Please contact a certified technician.
LAMPSTAND BY/TEMP Indication
BP68-00588A-03Eng(002~015) 8/22/06 5:15 PM Page 10
To Next Page
Loading...
Need help?
General