Product Specification
Samsung Electronics 2-1
2. Product Specification
2-1 Product Features
Block Specfication Major IC Remark
DMD - Panel Resolution : 1920x1080 xHD3 DMD Panel
RF
- Integrated HDTV Tuner
(NTSC/ATSC/QAM TUNER Embedded)
ATI NXT2004, QAMLink
Power
- Input Voltage : AC120V
- Stand-By : under 25W
Stand-by (KA1M0565)
Video
- DNIe4- NTSC, ATSC- HDMI,PC
- 3D Comb filter
ADV7401, ATI X226B,
uD64083
Sound
- speaker : 20W x 2
- Trusurround XT, Dolby Digital
MSP4440
Cabinet - L8 Design
■ Chip Description
- ATI x226B : Xilleon 226 is the most advanced and highly integrated component for digital set-top boxes, information appliances,
and televisions. Xilleon 226 provides dual-stream high-definition decode and display, an assortment of peripheral
device controllers, and an embedded microprocessor.
- ADV7401 : The ADV7402 is an integrated video decoder that automatically indicates and converts High Definition or Standard
Definition analog baseband television signal into a 4:2:2 component digital video data stream compatible with 20/16-
bit or 10/8-Bit CCIR601/CCIR656 outputs for standard definition & SMPTE293M/296M/274M & ITU-R.BT1358 for
High definition. All RGB graphics signals are output as 30-bit 4:4:4 RGB or 20-bit 4:2:2 YCrCb.
- MSP4440 : The MSP 44x0G family of single-chip Multi standard Sound Processors covers the sound processing of all analog
TV-Standards worldwide, as well as the NICAM digital sound standards.
- ATI NXT2004 : The NXT2004 is a VSB/QAM receiver designed to operate in both the ATSC terrestrial and cable TV environ
ments. The device is intended for use in set-top applications, PC based applications and DTV systems. For VSB
or QAM channels the NXT2004 samples a 44 MHz IF signal, and presents MPEG data packets at the output.
- QAMLink : The BCM3125 combines an in-band 256-QAM receiver, an out-of-band QPSK receiver, a 4/16-QAM transmitter and
tuner interface functions.
- uPD64083 : uPD64083 realizes a high precision Y/C separation and a noise reduction by the three-dimension signal
processing for NTSC signal.