Samsung HLR5078WX - Page 19

Alignment & Adjustment
3-4 Samsung Electronics
2. DNIe
No Item Range Default Remark
1 Test Pattern 0 Test pattern selection
2 NR - -
3 SNI_PROC_CEA ON/OFF ON
4 SNI_PROC_CEP ON/OFF OFF
5 SNI_PROC_DEP ON/OFF ON
6 SNI_PROC_DCE ON/OFF ON
7 SNI_PROC_CCS ON/OFF ON
8 SNI_PROC_BWS ON/OFF ON
9 SNI_PROC_PCC ON/OFF ON
10 SNI_PROC_WTC ON/OFF ON
11 SNI_PROC_CTE ON/OFF OFF
12 SNI_PROC_CVD ON/OFF OFF
13 SNI_PROC_OUTP ON/OFF ON
14 CUTOFF 0~255 32
15 UPPER 0~255 240
16 LCE_GAIN 0~255 0
17 ALPHAL 0~255 170
18 ALPHAU 0~255 170
19 DCE_ALPHA 0~255 50
20 B_RATIO 12000 Low level information for the minimum value
21 W_RATIO 6000 High level information for the minimum value
22 BLACK_TILT 0~255 90 Black Stretch Area
23 WHITE_TILT 0~255 240 White Stretch Area
24 GAIN_X1 0~63 70 Gain of horizontal high frequency region
25 GAIN_X2 0~63 35 Gain of horizontal middle frequency region
26 GAIN_Y1 0~63 10 Gain of vertical high frequency region
27 GAIN_Y2 0~63 10 Gain of vertical middle frequency region
28 SUP_LIFT_SEL ON/OFF OFF
29 EXT_SEL ON/OFF OFF
30 BOOL_SUPP_SELX1 ON/OFF ON
31 BOOL_SUPP_SELX2 ON/OFF ON
32 BOOL_SUPP_SELY1 ON/OFF OFF
33 BOOL_SUPP_SELY2 ON/OFF OFF
34 BOOL_ENH_SEL ON/OFF ON
35 LOG_MODE ON/OFF ON
36 R_MR - 60
37 CORING_ON ON/OFF ON
38 RTH1 0~31 0
39 RTH2 0~31 3