Alignment & Adjustment
Samsung Electronics 3-13
12. GM1601
No Item Range Default Remark
1 ADC_RED_GAIN 128
2 ADC_GRN_GAIN 128
3 ADC_BLU_GAIN 128
4 ADC_RED_OFFSET 50
5 ADC_GRN_OFFSET 50
6 ADC_BLU_OFFSET 50
7 MADI_QUANT_TH0 4
8 MADI_QUANT_TH1 7
9 MADI_QUANT_TH2 64
10 GAMMA_CONTROL OFF
11 AUTO_COLOR OFF
12 TEST_PATTERN 0
13 SP_AMP 0
14 SP_PERIOD 0
13. OPTION
No Item Range Default Remark
1 Lamp Clear Initialize lamp usage time. Lamp Life is set to zero
2 User Reset All user settings are set to default
3 WB Reset OFF Initialize the White Balance value
4 EER Reset Clear the EEPROM
5 Lamp Life Lamp on time counter
6 AUTO POWER ON
The sets turns on automatically when the power cord is
plugged in
7 DNIe Demo ON/OFF ON DNle Demo function selection
8 Lamp Control Dynamic/Normal Dynamic Dynamic, Always
9 MUTE TIME 400ms
Time which the screen will be black while switching
channels
10 EDID WRITE
11 DDC Protection ON/OFF OFF DDC write ON/OFF selection
12 LNA Default Auto/OFF Auto LNA setting OFF/Auto selection
13 PROTECT ON Protection ON/OFF selection
14 WATCH DOG OFF Watch Dog ON/OFF selection
15 WD COUNT 0 Count for Watch Dog event
16 DEBUG MODE ATI226/GM1601 ATI226
17 DSUB MODE RS232
18 BUS STOP OFF
19
DIGITAL→DMD
To trans the CCA data form DIGITAL to DMD
20
DMD→DGITIAL
To trans the CCA data form DMD to DIGITAL
To Next Page
Loading...
