Operation Instruction & Installation
11-6 Samsung Electronics
11-2-2 Power Saving
- Sensing the outside brightness and controlling brightness with the Ray Sensor. (Off/On)
- OSD Operation Tree
- Image change with Power Saving
→ When turn the Power Saving function On, control the screen luminance with 8 Step changing width at the standard of 150
Lux. (The luminance of average house is 200 ~ 250 Lux.)
▶ Power Saving Operation Mode and Release Requirement
1) Operating Modes
2) Release Requirement (Factory Reset)
- BS Function : Off
To Next Page
Loading...
