Disassembly & Reassembly
Samsung Electronics 12-5
12-1-10 Separation of ASSY BRACKET P-WALL
Part Name Description Description Photo
Wall
Bracket
① Remove 8 screws.
: BH,+,B,M4,L12,ZPC(BLK)
② Remove 16 screws.
: BH,+,S,M4,L10,ZPC(BLK)
③ Remove Wall Bracket.
: Please lay the PDP panel face down on a soft surface
when separating front cover.
12-1-11 Separation of ASSY PCB P-SMPS & SMPS DC-DC
Part Name Description Description Photo
SMPS
&
SMPS
DC-DC
Board
① Detach all connectors from the Assy PCB P-SMPS.
② Remove 8 screws.
: PH,+,WWP,M3,L8,NI PLT
③ Remove the Assy SMPS PCB.
④ Detach all connectors from the Assy SMPS DC/DC
Board.
⑤ Remove 4 screws.
: PH,+,WWP,M3,L8,NI PLT
⑥ Remove the SMPS DC/DC Board.
: Wear gloves when handling the power board as there
may be some remaining electrical charge in the capacitor.
Specifically, avoid touching any part of the capacitor.
To Next Page
Loading...
