Samsung HPS5033X/XAC - Page 44

Alignment & Adjustment
Samsung Electronics 3-27
3-6-1 Voltage Adjustment
1. After replacing the SMPS or PDP panel, you must adjust the voltage referring to the voltage label printed on the panel.
(If you do not adjust the voltage, an abnormal discharge symptom may appear.)
Value Board Adjustment
Vs 200
SMPS-MAIN
Va 65
Vset 190
SMPS-DC/DCVe 115
Vscan -190
Voltage
Label
SMPS-MAIN SMPS-DC/DC
2. A point of adjusting SMPS-MAIN voltage.
Vs Adjustment
Va Adjustment
Vs Test point
Va Test point