Samsung HT-BD7200 - Page 29

29
ENG
● CONNECTIONS
Case 2 : Connecting to a Wireless IP sharer
You can connect to network with a Wireless IP sharer. See page 50 for Wireless Network Setup.
This unit is compatible with only Samsung Wireless LAN Adapter. (not supplied)
(Model name: WIS09ABGN).
- The Samsung Wireless LAN Adapter is sold separately.
- Contact a Samsung Electronics agent or service center for purchasing.
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended
for stable operation of the wireless network.)
Wireless LAN, in its nature, may cause interference, depending on the use condition (AP
performance, distance, obstacle, interference by other radio devices, etc).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
When applying the security key for the AP (wireless IP sharer), only the following is
supported.
Authentication Mode : WEP, WPAPSK, WPA2PSK
Encryption Type : WEP, TKIP, AES
M





1)
2)
.PEFN1PSU
8JSFMFTT*1TIBSFS
.PEFN$BCMF
8JSFMFTT-"/
"EBQUFS
OPUTVQQMJFE