81
ENG
● USING BLUETOOTH
You can disconnect the Blu-ray Home Cinema from the Bluetooth device.
(refer to Bluetooth deivice's user's manual)
The Blu-ray Home Cinema will be disconnected.
When the Blu-ray Home Cinema is disconnected from the Bluetooth
device, the Blu-ray Home Cinema will display "READY" on the front
display.
Press the FUNCTION button on the front panel of the Blu-ray Home Cinema to switch from “BT AUDIO” to another
mode.
The connected Bluetooth device will wait a certain time for response from the Blu-ray Home Cinema before
terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)
The currently connected device will be disconnected.
In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Blu-ray Home Cinema and the Bluetooth device exceeds (
10 m
). If the distance is returned to the
effective range or you restart the Bluetooth device, the Bluetooth connection can be restored.
With some Bluetooth devices, some functions may not work properly.
Operational specifi cations for corresponding devices such as mobile phones and MP3 players may
differ when pressing the buttons -play, pause, stop, ff, rew, next, back- on the remote controller.
The DOLBY PRO LOGIC II and wireless module do not work in Bluetooth connection mode.
•
•
•
•
M
To disconnect the Bluetooth device from the Blu-ray Home Cinema
To disconnect the Blu-ray Home Cinema from the Bluetooth device
HT-BD7255_ELS_0519-3.indd 81HT-BD7255_ELS_0519-3.indd 81 2009-05-19 5:40:192009-05-19 5:40:19
To Next Page
Loading...
