Samsung HT-D7100 - Connecting an External Digital Component

22 English
Connections
Connecting an External Digital Component
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital
component.
Press the FUNCTION button to select D. IN input.
The mode switches as follows : BD/DVD  D. IN  R. IPOD  W. IPOD  FM
NOTE
To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV.
This system supports Digital sampling frequencies of 32 kHz of higher from external digital
This system supports Digital sampling frequencies of 32 kHz of higher from external digital
components.
components.
This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream cannot be
supported.
1.
2.
•
✎



OPTICAL
DIGITAL
AUDIO IN
5V 500mA
DC 12V
Optical Cable
(not supplied)
Set-Top Box
OPTICAL
HT-D7100_ELS_1227.indd 22HT-D7100_ELS_1227.indd 22 2011-12-27  1:18:472011-12-27  1:18:47