Why is Dolby Digital 5.1 CH Surround Sound not produced on my Samsung Home Theater System?
Dolby Digital 5.1 CH Surround Sound is only produced if the disc is recorded with 5.1 channel sound. Also, check if the audio language is correctly set to Dolby Digital 5.1-CH in the information display.
Why does the remote control not work with my Samsung Home Theater System?
Check if the remote control is being used within its operational range of angle and distance. Also, verify if the batteries are drained and ensure that you have selected the correct mode (RECEIVER DVD/TV).
What to do if playback does not start on my Samsung HT-D553?
Confirm that the region number of the DVD is compatible. Note that CD-ROMs and DVD-ROMs cannot be played on this product. Also, make sure that the rating level is correct.
What to do if disc is rotating but no picture is produced on my Samsung Home Theater System?
First, verify if the TV power is on and check that the video cables are connected properly. Ensure the disc isn't dirty or damaged. If the issue persists, the disc may be poorly manufactured and not playable.
Why I cannot eject the disc from my Samsung HT-D553?
Check if the power cord is plugged securely into the outlet. If it is, try turning the power off and then back on.
Why is sound not produced on my Samsung Home Theater System?
Note that no sound is heard during fast playback, slow playback, and step motion playback. Check if the speakers are connected properly and if the speaker setup is correctly customized. Also, ensure that the disc is not severely damaged.
How to fix iPod connection failure with my Samsung Home Theater System?
Check the condition of the iPod connector. Keep the iPod S/W version up to date.
What to do if audio language and subtitles do not work on my Samsung HT-D553 Home Theater System?
Audio language and subtitles will not work if the disc does not contain them.
Why the Disc/Title menu screen does not appear even when the Disc/Title function is selected on my Samsung HT-D553 Home Theater System?
This can happen if you are using a disc that does not contain menus.
What to do if sound can be heard only from a few speakers and not all 6 on my Samsung HT-D553 Home Theater System?
First, ensure that all speakers are connected properly. You can also adjust the volume. If you are listening to a CD, radio, or TV, sound is typically output to the front speakers only. Select 'PROLOG' by pressing PL II (Dolby Pro Logic II) on the remote control to use all six speakers. Note that on certain DVD discs, sound is output from the front speakers only.
General| Type | Home Theater System |
|---|---|
| Number of Channels | 5.1 |
| Total Output Power | 1000 W |
| HDMI Output | Yes |
| USB Playback | Yes |
| Bluetooth | No |
| Video Up-Scaling | Yes |
| Anynet+ (HDMI-CEC) | Yes |
| Audio Decoding | Dolby Digital, DTS |
| Connectivity | HDMI, USB, Optical, Coaxial |
| Optical Digital Audio Input | Yes |
| FM Tuner | Yes |
| Disc Playback Formats | DVD, CD |
| Playable File Formats | MP3, WMA, JPEG |
To Next Page
