21
43
Setting the Speaker Mode
Press MENU button.
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
Press ENTER
button.
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
•
For C, LS, and RS, each time the button
is pressed, the mode switches
alternately as follows: SMALL ➝ NONE.
•
For L and R, the mode is set to SMALL.
•
With (Dolby Pro Logic II), the delay time may be different for each
mode.
•
With AC-3 and DTS, the delay time is set between 00 and 15mSEC.
•
Depending on PRO LOGIC and STEREO, the speaker mode may vary.
49
Note
SMALL
: Select this when using the speakers.
NONE : Select this when no speakers are installed.
To Next Page
Loading...
