Samsung HT-TZ312 - Connecting The Video Out To Your Tv

25
ENG
● CONNECTIONS● CONNECTIONS
CONNECTING THE VIDEO OUT TO YOUR TV
Choose one of the four methods for connecting to a TV.
AUX IN 2
AUX IN 2
METHOD4
(supplied)
METHOD1
METHOD2
METHOD3
METHOD 1 : HDMI
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the
HDMI IN jack on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable(not
supplied) from the Component Video Output (Pr, Pb and Y) jacks on the back of the DVD Player to the
Component Video Input jacks on your TV.
COMPONENT SELECT Function
With the main unit turned off, press and hold the Number 8 (COMPONENT SEL.) button on the
remote control for over 5 seconds.
<Y Pb Pr> or <RGB> will appear in the display.
Press the Number 8 (COMPONENT SEL.) button shortly to select <Y Pb Pr> to set the main unit to
COMPONENT mode.
1.
~
2.
HT-Z310-CIS-ENG-0403.indd 25 2008-04-03 �� 7:10:58
Downloaded From TheatreSystem-Manual.com Manuals