Why is my Samsung Home Theater System remote control not working?
If your Samsung Home Theater System remote control isn't working, first check if the batteries are dead. Also, ensure you're using the remote within its operational range and angle. Finally, verify that you've selected the correct mode (TV or DVD) on the remote.
Why is there no sound coming from my Samsung HT-TX500?
If no sound is coming from your Samsung Home Theater System, check if the speakers are properly connected and the speaker setup is correctly customized. Also, ensure the disc isn't severely damaged.
Why is sound only coming from some speakers on my Samsung HT-TX500 Home Theater System?
If sound is only coming from some speakers on your Samsung Home Theater System, select "PRO LOGIC II" by pressing PL II (Dolby Pro Logic II) on the remote control to use all six speakers. Make sure the DVD disc is 5.1-CH compatible and set C, SL, and SR to SMALL.
Why is Dolby Digital 5.1 CH Surround Sound not working on my Samsung Home Theater System?
To produce Dolby Digital 5.1 CH Surround Sound on your Samsung Home Theater System, confirm that the audio language is correctly set to DOLBY DIGITAL 5.1-CH. Also, check for the "Dolby Digital 5.1 CH" mark on the disc, as surround sound is only produced if the disc is recorded with 5.1 channel sound.
What to do if the main unit of my Samsung Home Theater System is not working?
If the main unit of your Samsung Home Theater System isn't working, turn off the power and hold the STOP button on the main unit for longer than 5 seconds. Note: Using the RESET function will erase all stored settings and should only be done if necessary.
Why is there no sound when listening to TV audio through my Samsung HT-TX500 Home Theater System?
If you're listening to TV audio through your Samsung Home Theater System and no sound is heard, pressing the eject button while using D.IN or AUX functions will activate the DVD functions, stopping the TV audio.
What to do if my Samsung HT-TX500 can't receive radio broadcast?
If your Samsung Home Theater System can't receive radio broadcasts, ensure the antenna is connected properly. If the antenna signal is weak, install an external FM antenna in an area with good reception.
What to do if playback does not start on my Samsung HT-TX500 Home Theater System?
If playback doesn't start on your Samsung Home Theater System, check the DVD's region code; discs from abroad might not play. Ensure the rating level is correct. Note that CD-ROMs and DVD-ROMs cannot be played on this DVD player.
Why is there no picture on my Samsung Home Theater System even though the disc is rotating?
If the disc is rotating in your Samsung Home Theater System but no picture appears, check if the disc is dirty or damaged, ensure the video cables are properly connected, and verify that the TV is powered on.
Why does playback not start immediately on my Samsung Home Theater System?
If playback doesn't start immediately when you press Play/Pause on your Samsung Home Theater System, and you're using a deformed or scratched disc, wipe the disc clean.
General| Type | Home Theater System |
|---|---|
| Brand | Samsung |
| Model | HT-TX500 |
| Audio Channels | 5.1 |
| DVD Player | Yes |
| HDMI Inputs | 2 |
| HDMI Output | 1 |
| USB Port | Yes |
| Wireless Rear Speakers | No |
| Speaker Configuration | 5.1 |
| Radio | FM |
| Audio Formats Supported | Dolby Digital, DTS |
| Supported Disc Formats | DVD, CD |
| Connectivity | HDMI, USB |
To Next Page
