Samsung HT-X70 - Speaker Installation; Installing Speakers on Stand

14
Connecting the Speakers(Con't)
HT-TX72
Center Speaker
Rear Speaker(R)
iiiiiii
Front Speaker (R) Front Speaker (L)
HT-TX75
Center Speaker
Rear Speaker (R)
Rear Speaker (L)
Front Speaker (R)
Subwoofer
Front Speaker (L)
| Speaker Installation
With the HT-TX72 front speakers and HT-TX75 front/rear speakers, you have the option of installing the speakers on
Stands, or directly to the Stand Base.
Speaker Components (HT-TX72/HT-TX750nly)
SPEAKER STAND STAND BASE Screw (A) Screw (B)
Hew to Install the Speaker on the Stand
1
2
3
4
5
6
Turn the STAND upside-down and connect it to
the STAND BASE.
Inserttwo screws (A) into the two holes marked with arrows
using a screwdriver as shown in the illustration.
Insert a screw (B), into the hole on the rear of the Speaker
STAND.
Connect the assembled stand to the SPEAKER.
Insert another screw (B) into the hole on the rear of the
speaker usinga screwdriver as shown in the illustration.
This is the SPEAKER successfully assembled with
the Stand.
• Make sure that the speaker is installed on a flat and stable area.
Otherwise it may be easily knocked over.
How to Install the Speaker on the Stand Base
@
@
1 Connect the SPEAKER with the STAND BASE.
Insert the screw (B) into the hole on the rear of the speaker
using a screwdriver as shown in the illustration.
This is the SPEAKER successfully assembled with
the Stand Base.
15