Samsung HT-X810 - System Setup; DVD Playback Mode and DRC Settings

47
ENG
● SYSTEM SETUP
DVD PLAYBACK MODE
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to
DVD-Video mode.
Press the MENU button while the disc tray is open.
Press the Cursor
▼ button to move to Setup and then press the
ENTER or ► button.
Press the Cursor
▼ button to move to DVD TYPE and then press
the ENTER or ► button.
Press the Cursor
▲ , ▼ button to move to DVD VIDEO and then press
the ENTER button.
Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.
DVD VIDEO : Set to play the DVD video contents contained on
a DVD audio disc.
DVD AUDIO : Set to play the default DVD audio.
DVD Play mode is set to DVD Audio as factory default setting.
Powering off the main unit will automatically switch to the DVD Audio mode.
DviX (R) Registration
Please use the Registration code to register this player with the DivX (R) video on demand format.
To learn more, go to www.divx.com/vod.
SETTING THE DRC (DYNAMIC RANGE COMPRESSION)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby
Digital sound when watching movies at low volume at night.
In Stop mode, press the MENU button.
Press the Cursor
▼ button to move to Audio and then press the
ENTER or ► button.
Press the Cursor
▼ button to move to DRC and then press the
ENTER or ► button.
Press the Cursor
S,T to adjust the DRC.
When the Cursor
S button is pressed, the effect is greater, and
when the Cursor
T button is pressed, the effect is smaller.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
1.
2.
3.
4.
•
•
•
M


1.
2.
3.
4.
•
MOVE ENTER EXITRETURN
MOVE ENTER EXIT
RETURN
CHANGE
RETURN EXIT
MOVE ENTER EXITRETURN