Samsung HT-Z410 - Page 21

Samsung Electronics 3-3
Disassembly & Reassembly
No. Part Name Description Description Photo
4 ASSY
FRONT
1) Disconnect the 3 FFc cables which is
connected to the MAIN PCB.
In case of pulling up the MAIN PCB
cable, it is easier to pull up when
pressing the grip.
2) Unscrew the 1 screw on the front
side.
: BH 3*6 SILVER
3) Unhook the 2 hooks at the top of the
Cabinet-Front.
4) Unhook the 4 hooks at the left, right
and bottom of the Cabinet-Front to
separate it.
5 PCB 1) Separate 2 cables which is
connected between POWER PCB
and MPEG/AMP PCB.
In case of pulling up the POWER
PCB and MPEG/AMP cable, it is
easier to pull up when pressing the
grip.
2) Unscrew the 11 screws of BOTTOM
cover.
: BH 3*6 SILVER
3)
Unscrew the 5 screws of rear panel.
: BH 3*10 BLACK