Why is there no sound coming from my Samsung HT-Z420?
Sound may not be heard during fast, slow, or step motion playback. Check if the speakers are properly connected and the speaker setup is correctly customized. Also, verify that the disc is not severely damaged.
Why is sound only coming from a few speakers on my Samsung HT-Z420?
When listening to a CD or radio, sound is output only to the front speakers (L/R). Select "PRO LOGIC II" by pressing PL II (Dolby Pro Logic II) on the remote control to use all six speakers. Ensure that the DVD disc is DVD compatible. If you set C, SL, and SR to /OFF/ in the speaker mode in the audio setup, set C, SL, and SR to SMALL.
What to do if I fail to connect my iPod to Samsung HT-Z420 Home Theater System?
Check the contact condition of the iPod connector and the cradle of the Home theater again. Keep the iPod software version up to date.
How to fix a Samsung HT-Z420 Home Theater System disc tray that won't open?
Ensure the power cord is plugged securely into the outlet. Turn off the power and then turn it back on.
What to do if my Samsung HT-Z420 can't receive radio broadcast?
Ensure the antenna is connected properly. If the antenna's input signal is weak, install an external FM antenna in an area with good reception.
What to do if playback doesn't start immediately on my Samsung Home Theater System?
Are you using a deformed disc or a disc with scratches on the surface? Wipe the disc clean.
General| Brand | Samsung |
|---|---|
| Model | HT-Z420 |
| Category | Home Theater System |
| Language | English |
To Next Page
