4-24 Samsung Electronics
Troubleshooting
DVD flash Initialization & Update (firmware)
1. Prepare or Making CD/DVD or USB that contains HEX file for
Update.
2. Select the folder which has update file, then ‘Updating’ will
appear on the screen.
After completing the update, the power will go out and on, then
tray will open automatically.
3. Make the unit ‘NO DISC’ state if there is a disc and then close
the tray.
4. Press "STOP" button of Main Unit 5 seconds more, Display
Indicator shows ‘INITIALIZE’ then Power go out.
5. Initialization complete.
<Fig. 4-14 Connecting USB>
<Fig. 4-15 TV Display (On Updating)>
<Fig. 4-16 Update Start>
To Next Page
Loading...
