Using
the
Bracket-Wall
Mount
When the main unit is
connected
to
a TV with optical cable(Digital input),
it
is
automatically turned on when you turn on
the
power
of
your
TV.
OPTICAL
OUT
METHOD 2 : DIGITALIN
'+-~=t------II_II
(OPTICAL)
DIGITALIN
TV
AUDIO
OUT
L R
METHOD 1 : AUDIO IN
()=
• If the HW-C450 is connected
to
external devices besides a
TV,
abnormal
sound may occur due to excessive sound input. If this occurs, please use
after reducing the volume.
• See page 12
of
the user manual
to
connect the Wireless Subwoofer.
2
If
the
strength
of
the
wall
is
insufficient
for
the
product installation,
make
sure
to
reinforce
the
wall
before
the
installation.
~
Fit the unit into the corresponding
~
slots of the wall mount bracket.
For secure installation, make sure
the mounting studs slide down
to the right into the bottom
of
the
slots.
cr
If
you
do
not
install
this
unit
firmly,
it
may
fall
down
and
cause
injury.
~
Place the wall mount bracket
on
a wall
~
surface and then secure it with appropriate
screws (not supplied).
Using
the
AUTO POWER LINK function
The Crystal Surround Air Track is automatically turned on when you turn the
power on
of
a TV
or
any device connected
to
Air Track with the optical cable.
~
This
is
the completion of the
~
suggested wall mount installation.
*2 inches
(5
cm)
or
more
VOUCONTROL
MUTE
1V
CH
A
Press AUTO
POWER
on the remote control
of
this unit.
• Auto
power
link function turns on and
off
each
time you press AUTO POWER.
AUTO
POWER
LINK
Display
ON
POWER
LINK
ON
OFF
POWER
LINK
OFF
()=
• If a
TV
or
any device connected to Air Track with the optical cable
is
off
and there
is
no digital input, the Air Track
is
turned off after 20 minutes.
To Next Page
Loading...
