Why can't I select Dolby Pro Logic IIx mode on my Samsung HW-D600?
You can't select Dolby Pro Logic IIx mode on your Samsung Receiver if the input signal is not a 2-channel signal. This mode is only available for 2-channel signals such as Dolby Digital, PCM, and 2-channel analog input signals.
What to do if Samsung HW-D600 Receiver remote controller does not work?
If your Samsung Receiver remote controller isn't working, try replacing the batteries with new ones. Also, ensure you are operating the remote at a close distance to the main unit.
Why is there no sound coming from my Samsung HW-D600?
If your Samsung Receiver isn't producing sound, check the following: Ensure the speakers and external components are connected correctly. Make sure the Mute function is not enabled by pressing the MUTE button. Adjust the volume to an audible level. Verify that the Speaker Size is set correctly (not to NONE).
How to fix Samsung HW-D600 Receiver when it can't receive radio broadcasts?
If your Samsung Receiver can't receive radio broadcasts, ensure the FM antenna is connected correctly. If the antenna signal is weak, try installing the FM antenna in a location with better reception.
Why is the sound from the left/right channels reversed on my Samsung HW-D600 Receiver?
If the sound from the left and right channels is reversed on your Samsung Receiver, check the left and right speaker or input/output cables and connect them correctly.
To Next Page
General
