What to do if TV SoundConnect (TV pairing) failed on Samsung Speakers?
First, ensure your TV supports TV SoundConnect, as it's available on some Samsung TVs released from 2012 onwards. Next, update your TV to the latest firmware. You can also reset TV SoundConnect and connect again by pressing and holding the p button for 5 seconds.
What does it mean when the red LED is blinking on my Samsung Subwoofer?
If the red LED on your Samsung Subwoofer is blinking and no sound is produced, your subwoofer may not be connected to the main unit. Try to connect your subwoofer again.
How to fix Samsung HW-K551 when no sound is produced?
If your Samsung Speakers are not producing sound, first check if the Mute function is activated. If it is, press the (Mute) button to cancel it. Also, check the volume level and adjust it if it's set to the minimum.
Why is my Samsung Speaker System remote control not working?
If the remote control for your Samsung Speaker System isn't working, the batteries might be dead, or you may be too far from the main unit. Try replacing the batteries with new ones and move closer to the unit.
How to fix Samsung HW-K551 when TV SoundConnect (TV pairing) failed?
If TV SoundConnect (TV pairing) failed, ensure your TV supports TV SoundConnect (available on some Samsung TVs released from 2012 onwards) and has the latest firmware. You can also reset TV SoundConnect and connect again by pressing and holding the p button for 5 seconds. If problems persist, consider updating your TV with the latest firmware.
What to do if the Samsung Subwoofer remote control does not work?
If the remote control for your Samsung Subwoofer isn't working, start by replacing the batteries with new ones. If that doesn't solve the issue, try moving closer to the unit.
What to do if Samsung HW-K551 Speakers remote control does not work?
If the remote control for your Samsung Speakers isn't working, first, try replacing the batteries with new ones. If that doesn't solve the issue, move closer to the main unit, as the distance may be too far.
Why is the red LED blinking on my Samsung Speakers subwoofer?
If the red LED on your Samsung Speakers subwoofer is blinking and no sound is coming out, it might not be connected to the main unit. Try connecting your subwoofer again.
Why did the TV SoundConnect (TV pairing) fail on my Samsung Subwoofer?
TV SoundConnect is supported by some Samsung TVs released from 2012. Check your TV to see if it supports TV SoundConnect. Update your TV with the latest firmware. To reset the TV SoundConnect connection, press and hold the p button for 5 seconds.
What to do if the Samsung HW-K551 remote control is not working?
If your Samsung Speakers remote control isn't working, the batteries might be drained, or you may be too far from the main unit. Try replacing the batteries with new ones and move closer to the unit.
Provides essential safety guidelines and warnings for the product.
Details warnings about electric shock, moisture, and chemical hazards.
Outlines precautions for installation, ventilation, heat, and battery handling.
Explains the functions of each button on the remote control.
Details precautions for installing the soundbar safely on a wall.
Explains how to connect the subwoofer wirelessly, both automatically and manually.
Instructions for connecting the soundbar to a TV using a digital optical cable.
Provides steps to connect the soundbar to a TV using an HDMI cable.
Addresses common problems like no power, no sound, remote issues, and connectivity failures.
General| Audio decoders | DTS 2.0, Dolby Digital 5.1 |
|---|---|
| RMS rated power | 340 W |
| Audio output channels | 3.1 channels |
| Audio Return Channel (ARC) | Yes |
| Product color | Silver |
| TV stand usage | - |
| Audio formats supported | AAC, FLAC, OGG, WAV, WMA |
| Consumer Electronics Control (CEC) | Anynet+ |
| Soundbar speaker RMS power | - W |
| Subwoofer type | Active subwoofer |
| Subwoofer location | Separate |
| HDMI in | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Connectivity technology | Wireless |
| Subwoofer driver diameter (imperial) | 7 \ |
| Package depth | 210 mm |
| Package width | 1175 mm |
| Package height | 488 mm |
| Package weight | 12000 g |
Weight and Dimensions| Depth | 87.5 mm |
|---|---|
| Width | 1010.5 mm |
| Height | 54 mm |
| Soundbar weight | 2600 g |
| Subwoofer depth | 154 mm |
| Subwoofer width | 452 mm |
| Subwoofer height | 335 mm |
| Subwoofer weight | 6800 g |
To Next Page