Samsung HW-MS6500 - Page 24

Installing an additional Sound bar when Sam sung wireless speakers are already in use
1. On the Home screen of the Samsung Multi room app, select Settings (@ )at the top, and then
selec t " Add Speaker "
- [Samsung] R3 <. SETTINGS
... ~ I Add Speaker
Alarm
2. To connec t the Sound bar to 2 Samsung wireless speakers and configure a surround sound system,
follow t
he steps shown below. (You cannot set up a surround sound system using one audio device
and one Soundbar.)
0 Touch = to go to the list of all speakers .
fl Touch : on the right of the Sound bar model name.
~ Touch Surround Setup . Select Done after dragging the speaker to the desired location.
0 The Surround connection is complete.
Surround Setup
Drag speakers to the desired pO!tltion
ALBUMS
I
Samsung Sound bar
.
...
GIOUP
···~
···~
A.L SPEAKERS
I [Samsung] R3
Surroundt SurroundA:
I [Samsun.9J R3
Soundbar ~ }
I l ·amsung Soundbar
NOTE
• To connect an additional SWA-9000S (not supplied), disconnect the Samsung wireless speakers
from the Sound bar to disable the surround sound system. (If connecting the surround speakers
without disconnecting SW A-9000S, sound is played via both the Samsung wireless speaker and the
Surround
speaker.)
ENG -18