Samsung HW-Q600A - Connecting External Devices (cont.); Optical Cable Connection for External Audio Input

ENG - 18
NOTES
 When you use Dolby Atmos®: 
 When Dolby Atmos® is activated, “DOLBY ATMOS” appears in the front display.
 ConguringDolbyAtmos®onyourBDplayerorotherdevice.
Open the audio output options on the settings menu of your BD player or other device and make
sure that “No Encoding” is selected for Bitstream. For example, on a Samsung BD Player, go to

SupportedUHDSignalsSpecication(3840x2160p)
Frame rate (fps) Color depth RGB4:4:4 YCbCr4:4:4 YCbCr4:2:2 YCbCr4:2:0

8 bit    
 - -  
 - -  

8 bit - - - -
 - - - -
 
Connecting using an Optical Cable
OPTICAL OUT
HDMI TO TV
(ARC)
DIGITAL AUDIO IN (OPTICAL)
Optical Cable
(not supplied)
Bottom of the Soundbar
󱂓
BD / DVD player /
Set-top box /
Game console
󱂔
Top of the Soundbar
D.IN
1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT port of the Source
Device using a digital Optical Cable (not supplied).
2. Select “D.IN” mode by pressing the (Source) button on the top panel or on the remote control.