ENG - 37
12 SOFTWARE
UPDATE
Samsung may offer updates for the Soundbar’s
systemrmwareinthefuture.
USB port
HDMI
HDMI TO TV
(eARC/ARC)
DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
DC 24V
USB (5V 0.5A)
If an update is offered, you can update the
your Soundbar.
USB Update
After the update completes, all your customized
user settings are maintained.
1. Connect a USB drive to the USB port on your
computer.
Important: Make sure there are no music
2. Go to https://www.samsung.com/us/support/
downloads/ on your computer Select the
product type or enter the model number of
your Soundbar and download the latest
For more information about update, refer
to Upgrade Guide.
3.
drive.
4. Turn off the Soundbar and connect the USB
USB port on the Soundbar.
5. Turn on the Soundbar and press the
(Source) button to select USB source.
“UPDATE” will be displayed, this may take up
to 3 minutes.
UPDATE
B --%
DONE
BYE
displayed UPDATEB --%DONEBYE
in sequence, B, D or H can be displayed
NOTES
Soundbar is rebooted automatically when the
update is completed.
This product has a DUAL BOOT function. If the
During update, do not turn it off or remove the USB.
If update does not proceed, reconnect the Soundbar
power cord.
When the latest version is installed, no update is
performed.
Depending on the USB type, update may not be
supported.
If the connection to the subwoofer is not re-
established automatically after the update, refer to
page 17.
If the software update fails, check if the USB drive is
defective.
Mac OS users should use MS-DOS (FAT) as the USB
format.
To Next Page
Loading...
