ENG - 26
NOTES
When you use Dolby Atmos®/DTS:X: If the input source is Dolby Atmos®/DTS:X, refer to “Output
on page 13.
When Dolby Atmos® is activated, “DOLBY ATMOS” appears in the front display.
When DTS:X is activated, “DTS:X” appears in the front display.
Open the audio output options on the settings menu of your BD player or other device and make
sure that “No Encoding” is selected for Bitstream. For example, on a Samsung BD Player, go to
HDMI Pass-Through is that the Soundbar plays the audio from the source through its own speakers
and sends the unaltered video signal to a TV via the second HDMI cable.
Frame rate (fps) Colour depth
< 60
8 bit
10 bit - -
12 bit - -
120
8 bit - - - -
10 bit - - - -
Method 2. Connecting using an Optical Cable
OPTICAL OUT
DIGITAL AUDIO IN (OPTICAL)
Optical Cable
(not supplied)
Bottom of the Soundbar
BD / DVD player /
Set-top box /
Game console
D.IN
Top of the Soundbar
1. Connect the DIGITAL AUDIO IN (OPTICAL) port on the Soundbar and the OPTICAL OUT port on the
2. Select “D.IN” mode by pressing the (Source) button on the top panel or on the remote control.
3. The external device sound is output from the Soundbar.
27 / 1.015 26 / 1.013 27 / 1.015
To Next Page
Loading...
