Samsung HW-S60B Full Manual

ENG - 33
Disconnecting the Bluetooth device from a Soundbar
You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s
user manual.
• The Soundbar will be disconnected.
• If the Soundbar is disconnected from the Bluetooth device, the multicolor LED indicator on the
Soundbar blinks "Red” three times.
Disconnecting the Soundbar from the Bluetooth device
Press the (Multi Function) button at the top of the Soundbar or the (Source) button on the
remote control to select the mode other than “Bluetooth”.
• Disconnecting takes time because the Bluetooth device must receive a response from the
Soundbar. (Disconnection time may differ, depending on the Bluetooth device)

Samsung HW-S60B Specifications

General

Audio decoders	DTS 5.1, Dolby Atmos, Dolby Digital Plus
RMS rated power	200 W
Audio output channels	5.0 channels
Soundbar mode control	Yes
Number of woofer drivers	4
Number of tweeter drivers	3
Subwoofer included	-
Product color	Black
Virtual assistant	Amazon Alexa
USB direct playback	No
Audio formats supported	AAC, AIFF, ALAC, FLAC, LPCM, MP3, OGG, WAV, WMA
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 75 %
Sustainability certificates	ENERGY STAR
Bluetooth codec	SBC
Wi-Fi frequency	5 GHz
Connectivity technology	Wired & Wireless
Package depth	157.48 mm
Package width	906.78 mm
Package height	124.46 mm
Package weight	4082 g
Cables included	AC, HDMI
Number of products included	1 pc(s)

Weight and Dimensions

Depth	105 mm
Width	670 mm
Height	62 mm
Soundbar weight	2700 g