Samsung HW-S60T - Bluetooth Pairing and Playback; Sound Control Navigation; Woofer and Volume Adjustment

ENG - 10
󱂗
Bluetooth PAIR
Switch the Soundbar to Bluetooth pairing mode.
When you press the button, the LED display changes as shown below.
• Until pairing is complete, the Multicolour LED changes as Red → Green → Blue in turn.
LED
Indicator
Red → Green → Blue Blinks
Cyan Blinks X3
“Ready to connect via Bluetooth.”
󱂘
p (Play / Pause)
You can also play or pause music by pressing the button.
󱂙
Up/Down/Left/Right
Press Up/Down/Left/Right on the button to select or set functions.
󱂚
(Sound Control)
By pressing the button, you can select the desired audio mode. The desired item can be adjusted using
the Up/Down buttons. Each time the mode changes, the Multicolour LED blinks in white.
LED
Indicator
White Blinks X1
“Treble”  “Bass”  “Sync”  “Side Level”
󱂛
WOOFER (BASS) LEVEL
Push the button up or down to adjust the level of the woofer (bass) to -12 or between -6 to +6. To set the
woofer (bass) volume level to 0 (Default), press the button.
󱂜
VOLUME
Push the button up or down to adjust the volume.
LED
Indicator
White moves to right X1
Volume Up
White moves to left X1
Volume Down